Home Predator Pool Table Felt and Cloth How to Center the Predator Arcadia Felt Logo When Installing Pool Table Cloth
Educational guide

Updated September 2026

How to Center the Predator Arcadia Felt Logo When Installing Pool Table Cloth

The following video shows how to center the Predator logo properly when installing the Predator Arcadia pool table cloth. The middle of the letter "R" should be aligned with the center diamond on the bottom inside of the end rail.

Transcript
Loading transcript…

Centering Arcadia Felt Logo Questions

The middle of the letter "R" in the Predator logo should line up with the center diamond on the bottom inside of the end rail. The logo goes under the rail, not on top of it.

It's purely cosmetic — a centered logo gives the table a clean, professional, tournament-ready look. It has no effect on how the table plays.

No. Logo placement is separate from the felt's playing surface and tension. As long as the cloth itself is installed tightly and evenly, an off-center logo won't affect roll, speed, or consistency.

Predator recommends an experienced installer for the tightest, most accurate installation. Check the felt for knots or defects before starting — the felt warranty covers materials, but not labor costs from installation.

Yes — the video above walks through the alignment step by step, including a full text transcript.

Once the cloth is stapled down and under tension, repositioning it isn't practical without redoing the installation. It's worth confirming alignment against the video before the final staple.